- Joined
- Jan 6, 2024
- Messages
- 22
- Likes
- 2
There is very obviously something I am missing or doing wrong. Please help me figure out what. I made a similar post after my second trimmed Wii with a 3.3 short and couldn't find an answer then. This board I trimmed extra wide in case I was trimming through something but it's happened again.
I have the pms-2 so I haven't moved the U10. Does that have to be connected to check the 3.3V line? I did try moving the U10 on one of the boards and it didn't work but there could be another issue with it.
Here are pictures of all of the trims I've done:
3rd Wii:
2nd Wii:
1st Wii:
I have the pms-2 so I haven't moved the U10. Does that have to be connected to check the 3.3V line? I did try moving the U10 on one of the boards and it didn't work but there could be another issue with it.
Here are pictures of all of the trims I've done:
3rd Wii:
2nd Wii:
1st Wii: