Search results

I did way more research into pi projects since posting and experimented with the pi zero a bit more. Here's what I found out: - GBA is still dodgy with it's default emulators but the standalone gpsp fixes all of that. - If gpsp doesn't work and you need a save file that's past the intro, to...

Bro. It's most likely that cheap stuff messing with you. Buy nice or buy twice. Get that UHS level my dude.

Is it a good SD card? If that's the limiting factor then maybe replace it with a delicious Sandisk brand fast SD card.

If you still haven't taken apart the wii, go for it. Neek2o does take a while to boot and the green fuzz is normal (for me at least). Before you do that though, try to refresh the cache and try again (press start).

I have a Raspberry Pi Zero device and I gotta say, GBA doesn't even have 100% compatibility (some games laggg hard). Though if you you are willing, then you should probably look up this thing called "Teensy" or "ADS1115." Here. Some guy had a custom MintyPi but everything else is on you. From...

Did you install BootMii as an IOS? That happened to me. I forgot and had to hunt down a BootMii IOS and install it with MultiModManager.

Grab yourself a USB-C from the site, save yourself some headaches. Then grab yourself a multimeter and a stick of superglue. Superglue for buttons on the squish tacts and multimeter to check/verify your connections. I keep seeing people use "red board BMS" but if you're using the RVL-PMS you...

Ebay. For parts. https://bitbuilt.net/forums/index.php?threads/revision-identification-guide.863/#post-9044 Look at all the guides. Good luck dude.

It's whatever you want to use for storage. If you used the same USB to install PortablizeMii, that's cool too. If you plug another USB in, PortablizeMii will ask to make new data on that USB. Basically whatever you plug in will be it's storage for everything. Pics are appreciated. I see your...

Yes. The USB also holds PortablizeMii data. PortablizeMii does not run without that.

Don't worry, once the parts come in for you, it'll all be labelled and most of it will be either common sense or in the guide. USB-C board connects a USB to read data and play games. The SD card is for the recommended Kingston USB to MicroSD adapter that is plugged in the USB-C board. If you...

Okay so G-Boy uses brand new custom variations of those custom PCBs exclusive to the G-Boy kit. They look like they function the exact same except with beginner friendly features like the clip-in joysticks and solderless audio. I don't know for sure, it's just what I gathered from the videos. As...

I can answer this. You do not need a Wiikey Fusion. That was some old solderless modchip used for the wii around 2009-2010, before Nintendo splashed glue all over the Eeprom or whatever. We have PortablizeMii which is literally an all in one package to get mods on the wii without the need for...

Well I kept my word. Last post, I closed it. I'm not going to show my spaghetti. That's something I'll do better next time. It was only there because I jumped the gun on wiring the GC+ without getting all the pieces together and I refused to measure wires. That's my bad. Here it is. I...

I don't know the exact ones that'll work so look around other people's finished worklogs and check out their BOM (bill of materials) but some key store names you can look through are Amazon, ebay, Digikey, MABDelectronics. Hope you find it.

Sorry my bad, I clicked Resident Evil 2 instead of Super Mario Galaxy. I'm going to try the Cheese Method first cause that sounds easier and I think I have that from my boomer softmodding days somewhere. I'm not about to cut more traces for that SD card and those wifi legs are TINY bro...

Jesus Christ. Anyone that's new to this, I encourage you to read through the entire trimming guide at least nine times before starting, including the software part. Forgot to install Bootmii as IOS and now the wii don't read wii games. Hackmii Installer does not go past the scam screen with the...

I've done this part a million times. It's booting, try unpluging and replug your cable when you have it powered on. Other than that, good luck.

I concluded that the Wii fugging died. New Wii. Found the composite pin. Took like a total of two seconds to get it running. Thanks for trying Cheese. I think it was the CPU. I see some melted garbage in between the crack but I have nothing sharp enough to clean it out. It was also cursed...

Have to report, Got the GC+ on the wii. Pressed A. Nothing. Can't get composite because I don't know which AV pin/hole to solder to on the screen itself. I think the wii itself just refuses to boot. I say that because analog UAmp is hooked up with no startup sound, no video displays and even if...