Search results

the LCD arrived and it works (luckily lol), a big thank you to xenii since jlc is making a fuss about the flat cable...

hi guys, I took steps to replicate xenii's project, moreover I thank him, an extremely helpful person who also helped me with the 3D files (inserting them on jlc gave me the problem that they were too small) and created a 3D model specifically for me.I ordered everything at 360° (just yesterday)...

thanks for the support, I started swapping with modbo 5.0: I had an old modbo 5.0 probably from the last PS2P (I decided not to use it in the end), but it didn't work, in the end it was the two resistors of 1k and 1.8k ko, the 1.8k one replicated by two 1k in series (1.95k in total...

hi guys, about a month ago I purchased a small batch of PS2 slims on ebay, in particular: 70004 -->excellent being the first with IDE compatibility 77004 77004 90004-->excellent as it was the last and was missing from the collection in addition to bringing the old "glory" they all had laser...

To say that a great job has been done is an understatement... congratulations indeed!

I created a circuit to simulate an atx power supply, in this way the original ps3 power supply became in effect an atx power supply!

I just put the video card in place, the fans were fixed with cables on the heatsink, now they each have 4 screws + I found a cable that fits the connector so that everything can be easily disassembled.

Hi guys, I present to you a new project, or rather a project finished years ago (2016) practically destroyed and rebuilt in progress: the old project had an fm2 + card with an A10 7700k, then integrated gpu and 500gb mechanical hdd. the new project in progress includes: X99 motherboard by...

for those interested, by changing the integrated cxr726080, the motherboard can startup

not to make the killjoy, but I used it before (in 2014)

hello, thank you for the starboard, but unfortunately the board does not part in any way even with your method (already tried on my own initiative), i can not understand this signal to what ic is correlated, i thought to the broadcom of the ethernet because i already but also replacing anything...

hi guys, a couple of problems with two 79001 cards, one board the voltage on the reset pin (3.3v) is missing, the fuses are ok,so I can not turn it on.what can this cause? , another card (always 79001) lights up but shows black screen, fuses always ok, thanks in advance