Search results

  1. Gman

    Question N64 Portable - PIF relocation issue

    Pin 23 and 24 are connected together.
  2. Gman

    Secret Santa 2024: Post/Discuss your gifts here!

    Thank you @YveltalGriffin for the LCR meter, very aesthetic PCBs, the blue rubber switches, and the Dave Matthews Band poster !
  3. Gman

    Secret Santa 2024: Post/Discuss your gifts here!

    One of the boxes has something else special in it if you haven't opened it..
  4. Gman

    Question [fixed] Weird fan sound issue Ashida

    It's a standard sized fan so you might have luck trying other fans that are the same dimensions but I do not know any improved part numbers off hand
  5. Gman

    Question [fixed] Weird fan sound issue Ashida

    There was an ashida variant that could fit the noctua fan I'm not sure if it was made available for download or not. That's basically the holy grail fan and it even moved more air which kept it the coolest and quietest.
  6. Gman

    Question [fixed] Weird fan sound issue Ashida

    This is normal for this kind of fan. You can try to find a balanced speed setting where it is not as noisy.
  7. Gman

    Nintendo 64 Classic Edition

    Well Done! The case looks really nice too.
  8. Gman

    N64HH V2

    I don't believe so. I was sitting down to re-do the layout of the 64amp this week and noticed there are not any small suitable replacements. I found another audio amp that will do the job and I am redesigning the 64AMP now.
  9. Gman

    Crazzyleprechaun's N64HHv2

    Great job! The N64 is making a come back
  10. Gman

    Release N64 Controller Module

    Yes it is for the main IC on the controller. And yes it is intended to be salvaged from the controller.
  11. Gman

    Release N64 Controller Module

    PCB: https://github.com/Gmanmodz/N64-Controller-Module Joystick Converter MCU: https://github.com/Gmanmodz/N64-Joystick-Converter For Joystick Calibration: The joystick will not function properly until it has been calibrated. Hold Z+R while powering on to enter calibration mode. Release Z+R...
  12. Gman

    Question Can anyone advise on how to repair WiiPMS when it malfunctions due to erroneous actions?

    I am not positive but when there is a failure it is almost always the BQ IC that has died.
  13. Gman

    N64 HH (Outdated)

    Always love a portable with a good Screen:Enclosure size ratio. Well done!
  14. Gman

    Question Ashida not charging at 3A

    The input voltage current is not the battery current. With 15v .27A, the battery current would be around 2-3 A. So it's working as intended.
  15. Gman

    WTS Completed Modded Noldendo, Hakko Fr-301, PSP 3000, 2 Xbox 360 S Consoles

    It's better if you list a recommended price when you sell something. Also these pictures are quite bad. Overall the listing is very poorly low effort. No additional features listed like what is even the internal storage size?
  16. Gman

    Question Configuring RVL-PMS-2's fan control

    It should have the latest firmware in that case.
  17. Gman

    Question Configuring RVL-PMS-2's fan control

    You need to wire SCW and SDW on the pms to the wii to enable the configurable features in rvloader. Make sure you are updated to the latest pms firmware as I'm not sure when you ordered this but there was an update on the fan control last year.
  18. Gman

    Question Repairing pms lite

    L4 : https://www.digikey.com/en/products/detail/samsung-electro-mechanics/CIGT201610EH2R2MNE/7041223 U8 : https://www.digikey.com/en/products/detail/texas-instruments/BQ24292IRGET/4146960
  19. Gman

    PMS PD 1 to RVL PMS 2

    These pads were deleted from the current PMS2 and PMSLite because they were only for supporting the older STUSB4500 IC which hasn't been used for quite some time. It is fine if you leave the SD and SC wires on the usb-c board disconnected.
Top