Search results

  1. tanakorn

    Question My XBOX won't boot up.

    และอีกสิ่งหนึ่งคือฉันตัดแต่งเมนบอร์ดเกินขอบที่ระบุ (เส้นสีแดง) ทําให้ xbox ของฉันไม่บู๊ตหรือไม่ ขอขอบคุณล่วงหน้าสําหรับความช่วยเหลือของคุณ
  2. tanakorn

    Question My XBOX won't boot up.

    ฉันใช้มัลติมิเตอร์เพื่อวัด 1v725 และไม่มีแรงต้านเกิดขึ้น เป็นไปได้ไหมที่สิ่งนี้ทําให้เมนบอร์ดของฉันไม่บู๊ตเครื่อง?
  3. tanakorn

    Question My XBOX won't boot up.

  4. tanakorn

    Question My XBOX won't boot up.

    Thank you very much. I will strictly follow your instructions. I follow your work Your portable xbox is really cool.
  5. tanakorn

    Question My XBOX won't boot up.

    I'm sorry, I think I copied English to post.
  6. tanakorn

    Question My XBOX won't boot up.

    Do EJECT and PWR have to be connected through a 10 kohm resistor to 3.3 volts at all times? I apologize for my use of English. I use google translate and would appreciate any help.
  7. tanakorn

    Question My XBOX won't boot up.

    Does the reset point have to be connected to ground at all times?
  8. tanakorn

    Question My XBOX won't boot up.

    Points 1, 2 and 3. Do I have to be connected to ground at all times?
  9. tanakorn

    Question My XBOX won't boot up.

    Hello everyone, I have several questions about my motherboard.
  10. tanakorn

    Question I want to make a portable xbox original.

    ขอบคุณมาก Worklog - PS3 R&D Thread | PS3 | PS3 PS3 | PS3 PS3 BitBuilt - ให้ชีวิตชีวาแก่คอนโซลเก่า
  11. tanakorn

    Question I want to make a portable xbox original.

    สวัสดีเพื่อนทุกคน จากกระทู้นี้ Worklog - Xbox Portable ที่ไม่มีชื่อ | Xbox Portable BitBuilt - ให้ชีวิตชีวาแก่คอนโซลเก่า ฉันต้องการสร้างต้นฉบับ xbox แบบพกพา ฉันไม่รู้ว่าใครสามารถแนะนําได้หรือไม่ ฉันต้องตัดบอร์ดและเชื่อมต่อที่ไหนเพื่อให้บู๊ตเครื่อง เมนบอร์ดของฉันคือ 1.6...
  12. tanakorn

    Worklog Unnamed Xbox Portable

    มันเจ๋งที่สุด คุณช่วยแนะนําฉันได้ไหม ถ้าฉันจะทําโดยที่ฉันไม่ได้ตัดเมนบอร์ด ฉันสามารถเรียกใช้ 3.3, 5, 12 โวลต์โดยตรงกับเมนบอร์ดได้หรือไม่? ขอบคุณมาก
  13. tanakorn

    Question MINI 560 resistor ?

  14. tanakorn

    Question MINI 560 resistor ?

  15. tanakorn

    Question MINI 560 resistor ?

  16. tanakorn

    Question Use the Arduino board to install the ATTiny24 IC firmware.

    สวัสดีทุกคนฉันต้องการความช่วยเหลือ ฉันจะใช้บอร์ด Arduino กับเฟิร์มแวร์ ATTiny24 ได้อย่างไร ฉันไม่สามารถแปลงเฟิร์มแวร์เพื่อใช้งานได้ มีใครช่วยสอนเรื่องนี้ได้บ้าง? หรือถ้าคุณแปลงไฟล์แล้วก็ยิ่งดี ขอบคุณสําหรับทุกความช่วยเหลือ (ฉันใช้ google translate)
  17. tanakorn

    Question N64 reads some cartridges

    Hello, thank you for helping me. I checked and it was still connected by the lead at the end of pin 17. Now I've fixed it. The cause is that the 3.3 volt cable I used was too long and thin. I shortened the cable and added another 3.3 volt cable, now it works.
  18. tanakorn

    Question N64 reads some cartridges

    สวัสดีค่ะทุกคน ก่อนอื่นต้องบอกก่อนว่าผมใช้ Google Translate ครับ ปัญหาของฉันคือ N64 ของฉันอ่านตลับหมึกบางส่วน ตลับหมึกบางตลับไม่สามารถอ่านได้ ผมควรแก้ไขอย่างไรดีครับ อธิบายไม่เก่ง โปรดดูคลิปที่แนบมา ขอบคุณสําหรับทุกความช่วยเหลือ N64 เทสบอร์ด @tnkgamediymod4645 (youtube.com)
  19. tanakorn

    Question N64 Screen

  20. tanakorn

    Question N64 Screen

    ฉันได้แก้ไขแล้ว ฉันเปลี่ยนหน้าจอเป็นหน้าจอใหม่ (ชุดหน้าจอเดิมมีอาการเหมือนกันทั้งสองชุด) (377) Nintendo64 พกพาจอ 7 นิ้ว - YouTube
Top