Search results

Hi initially I used a BMS USB Charger with 2x18650 cells in series. Thats gave me around 8.2V. But after the "incident" that the GND detached from the board I decided to connected the power supply instead, just to be sure. Initially, I did not wired but I checked the voltages and I had 5V on...

Hello Everyone, This weekend, I decided to trim my SCPH-79004 PS2, which I finally found on the market after months of searching. The process went very smoothly. I decided to start with the Standard Trimming. After sanding well and closely inspecting to ensure no layers were touching, I...

I will have a try. If this does not work I will try to rellocate the SD card as well, just in case. I read in a post some that could only boot after doing this. https://bitbuilt.net/forums/index.php?threads/sd-card-relocation-on-6-layer-wii.4088/

I as long as I heard here the 6 layers Wii is not suitable for portables. But you can maybe build a Wii Micro? I am doing the same to gain some experience. https://bitbuilt.net/forums/index.php?threads/guide-release-noldendo-wii-miicro.3750/

Hello, everyone. I have been in looking in the forum for a few months already and recently decided to start my first project, that is the Wii Micro, using, of couse, a 6 layers board. I went throught all the procedure to jailbreak the console and install the RVload and patch out the WiFi...

Hi, could you share the specs of you screen and where you found it? I want to build a portable PS2 myself but I am still deciding which screen I should use.