Search results

Hey man, have you the ios patches to run vWii without disc drive? Sorry for the offtopic

Thanks

Yes. Your Gdrive files is public too? Because i have interest to see more of Wii U things

I have another gamepad paired with my japanese wup-50 console. He have MAIN/AU/HF - C DH -01 writed on the board This is a (japanese) variant of your DRC-01?

Have other models?

I made some scans of Gamepad motherboard. He has SIX layers!! https://drive.google.com/drive/folders/1-YZbM5uq-XbEOt1NCt33Jk8M1K6XlKC9 I hope it is useful to someone

The A5X SoC have only cons haha

Do you know where the volume slider potentiometer tracks go?

Someone have puctures of a naked and sanded DRC (gamepad) motherboard? Because i'm searching manners to improve the sound quality of her.

What if the reason for needing at least 12v is because of the 12v regulator? Because if the console is powered with less than 12v, the 12v regulator stops working and does not send the ok signal to the SMC IC, correct? It's possible to try to remove this regulator (and spoof your signal on...

Who's Gary? GaryOderNichts?

Someone found a manner to patch disc drive on vWii? Because i installed a HDD on Sata port and like to play some WiiWare games, and these not run on VC injects.

How i remove these checks from Nintendont?

GEN2 SSD is ~300MB/s. It's a waaay better than 52MB/s of SD/eMMC 4-bit buses

@YveltalGriffin I don't want to trim this console. I only want to reduce overall power usage, increasing efficiency. Can you mark the all stock regulators are should be replaced with custon better ones? Can you mark too the points to input the custom regulated voltages? I am very grateful

@YveltalGriffin Can you sell the bistro regulator board? Because i don't have expertise do build theses boards

I have no interest in trimming the board. I think about removing the useless disk drive and filling it with batteries. so I can play on the gamepad and keep the console wherever I am, without depending on wall sockets. It is also in my interest to make it more efficient, so I think I will choose...

Why not use stock regulators to undervolting? Are they that much worse?

And about undervolting? It"s possible?

I know the vWii don't works without the disc drive, but about the GC/Wii injects? They works without he (and de_fuse patch)? It's possible to do a undervolt, specially on more demanding lines like 1v and 1.15v? What is the power consupmition and current(A) in vWii mode? Is much less than last...