Search results

Absolute work of art, see you in the cutting edge thread.

What's up nerds. The first public release of WavePhoenix is now available: https://github.com/loopj/wavephoenix A public WavePhoenix+ release will follow at some point, but feel free to let me know if you'd like to try a WavePhoenix+ beta in the mean time. I have a number of populated...

Pears you are insane, so much stealth cool shit you are working on.

too hot to handle Can’t wait to build one of these bad boys

Oh yikes, didn’t realize this was an international issue. Fingers crossed for a good resolution.

This seems like a matter for small claims court. I’m not sure what you expect the forum mods to do here. @cfc_12 do the right thing please

Can I get this on a t-shirt please.

The Ashida uses the OMGWTF here: https://bitbuilt.net/forums/index.php?threads/ashida-wii-portable.4529/) The OMGWTF trimming guide is here: https://bitbuilt.net/forums/index.php?threads/the-definitive-wii-trimming-guide.198/ There is a 6-layer "version" of OMGWTF but you don't want to use it in...

It depends on the display. None of the HDMI displays/driver boards I used during testing required 5V to operate, but many do - especially TVs - so it depends what you are building. GameCube controller navigation of the GCVideo menus worked fine for me using the stock shuriken-wii bitstream.

Typically the 3V3 and 1V8 lines that power fujiflex will also be switched off when your portable is powered off or in standby mode. If you are using one of the 4layertech power supplies, this is certainly the case. The 5V line is only used for hot plug detect.

Hey Logan, welcome to the hobby! As amazing as the Xii-Boy is, I'd strongly recommend starting with an Ashida as your first project. Are you comfortable with assembling surface-mount components onto bare PCBs? Also, in your screenshot you have the Xii-Boy flex PCB listed as a rigid PCB rather...

Unfortunately I think this is it. Even with zero overhead you won't be able to clock out the i2c commands fast enough. Assuming this is standard-ish 3 byte i2c payload of [target address][register address][register value], thats 29 bits of data (3 bytes + acks + starts and stops). Clocking this...

Heck yeh, love seeing completed G-Boys. Nice work!

If you only need HDMI output, the AVE is not required when using fujiflex. It is worth noting that the AVE will continue working just fine alongside fujiflex, so you can keep both if you'd like the option of both analog and digital video output, or don't want to remove the AVE.

Hey folks! Back when I was doing my research into "soft shutdown" I created a couple of pinout diagrams for the Wii Bluetooth module and the MX23L4005 mask rom chip ("MX"). The MX pinout has been floating around Discord but I wanted to share these diagrams here for posterity.

WOW