1. Bakuku

    Custom Gamecube Memorycards (Gore!)

    Whats up everybody, Long time no post. I’ve been commissioned recently to create two Gamecube memorycards in the same style as the Resident Evil 4 Chainsaw Controller (the awkward collectors item). I have to say I’m really glad how they turned up. It was also my first Airbrush commission...
  2. Wesk

    Model Gamecube Wavebird Controller Scan

    Wavebird Controller Scan Contains: Wavebird Controller Front Wavebird Controller Back w/o battery cover Wavebird Controller Back with battery cover Wavebird Controller Battery Cover Specs: These are high poly scans, average poly count per mesh is about...
  3. noycebru

    Worklog Custom gamecube tops

    I hope everyone had a great Thanksgiving! I'm in the process of designing new gamecube tops and I wanted to share what I've created so far. I was also wondering if you had any fun ideas, or if anyone has made anything similar? My inspiration to make these was the original xbox concept case that...
  4. Wesk

    GC Micro

    I totally forgot that I had to post this..... Features: - 4 controller ports with rumble (With adapter) - Auto switching AV port depending on cable - Nothing else really, it's just a really tiny GameCube Worklog here (With Nudez)...
  5. Wesk

    Model GC Micro STL's

    BOM: It's pretty straight forward - - 4 Layer Wii - Red board USB A x2 - RVL-PSU x 1 - NAND Flex x1 - PTH or any other regulator for 1.8v - Gamecube controller extension lead x4 (for adapter) - A latching power switch (There's a bit of room to use whatever you can fit) - A 35x35x10 fan and...
  6. Wesk

    Model Gamecube OEM Controller Scan

    I know you've been waiting for this Gamecube OEM controller 3D scan data. Contains: GC Controller Front GC Controller Back Specs: Included are the raw and re-meshed versions of the original scans, the re-meshed versions contain a lower poly count to be easier to work with but are...
  7. Question Gamecube controller protocol

    So I got my DIY GameCube controller emulator to output a 1 and a 0. I can also receive stuff. I read that the console sends 000000001 to look for the controller. What should i send back to tell the console that I am there?
  8. Nold

    Model [Guide / Release] Noldendo Wii Miicro

    Hi folks, today i'm happy to finally present to you my Wii Micro aka "Miicro" Project! About this project The goal of this project was to use as less additional components as possible and make most of them 3d printable. Also it recycles a lot of the Wii's mainboard and used the stock...
  9. DartWolf

    Question Pluto-IIx HDMI chip gamecube install documetation?

    Recently I acquired a gamecube and various components to mod it with. The Xeno chip is very straightforward, and the SD2SP2 mod chip plugs right in. I am having some difficulty finding install documentation on the Pluto-IIx HDMI soldering points. I already have GC-Video in the modchip, so I...
  10. Want to buy Wii Portable

    Hello all, I've been interested in buying a Wii portable for quite awhile and I have the funds now to buy one. I looking to purchase one from the price range of $500-$750. I don't have any crazy requests but I do want the Mx chip relocated on the Wii motherboard just so I can play Animal...
  11. vikMKW

    Question Gamecube Port PCB

    Background I'd like to make a PCB for the gamecube ports. Measured the pin pitch and connector spacing as best I could. I believe I got within an acceptable margin. Printing the layout onto paper before manufacturing the PCB saves time and money! I've attached a PDF file with my dimensions for...
  12. Omar Elsayed

    Question Questions about making a wii portable and other stuff

    1. Any good guide on making analog shoulder button presses? 2. My order is still awaiting fulfillment, but I want to add more stuff. Can I add it to my current order so I won't have to pay for shipping twice? 3. Does portablizemii replace the wii menu? Or can i go back to the wii menu if I want...
  13. Omar Elsayed

    Question I never used portablizemii before, but can it still run discs?

    Also, is there a way to trim the Wii disc drive smaller and relocate it once the wii motherboard is trimmed?
  14. Omar Elsayed

    Question Trimming a gamecube disc drive/ connecting a gamecube disc drive to a wii

    Hello, I'm new to making portables and would like to make a portable gamecube (Using a Wii motherboard). I plan to use the SD slot for the wii to load games, but i also want the satisfaction and option of inserting a real gamecube disc. Is it possible for me to connect a gamecube disc drive to a...
  15. N95

    Middleweight SwitchCube

    I have an idea which I am sure many of you share, I would like a Switch lite that can actually be played in docked mode on TV. I would like to take a normal switch v2 and install it into a Switch lite sized ish uni-body. Also I thought that it could be amazing if the body's sides were shaped...
  16. Diminuendo

    Worklog Haven't done a project in a while... SNES bluetooth controller Hori digital pad mod.

    I love my official SNES bluetooth controller for the switch and have enjoyed my various Knights - Hollow and Shovel - with it. Though, I can't help but find the lack of grips uncomfortable. Thankfully, Hori came up with a solution in the GameCube era; a SNES style controller with a more...
  17. Question GamePi Advance Attachment

    Hello; I've had a project on my desk for some months now, where the idea was to modify the Gameboy cartridge player for the Gamecube, remove the board and replace it with a Raspberry Pi with RetroPie. This way, not only can the bottom attachment display Gameboy cartridges, it can also emulate...
  18. Madmorda

    WTS Resin Cast Custom Buttons and Joysticks

    Hello all! I've been resin casting buttons almost daily for the last year, and I'm selling off some of my old stock. All of these buttons will need some kind of work before they can be installed. This might be as simple as gently running a knife around the edges to clean them up, or it may...
  19. VOS MOD

    Question PAL to NTSC Motherboard Help...Please?

    Hi all, Haven't really been active on here in awhile but recently I've been working on a GameCube related project and ran into an issue, so I thought who would be better to help than the lovely BitBuilt community? Background: My project is to transplant the BIOS chips (the two MX chips) from a...
  20. Wesk

    Model Noob Cube - Mini Gamecube

    Original thread here: Files here: