- Joined
- Oct 26, 2022
- Messages
- 15
- Likes
- 11
I've been inspired by all of the new pcb designs, so I thought I'd give it a try too. I read in thedrew's thread that he used peak through to help with this but that didn't work well for me, so i traced the main section of the wii and saved it as a bitmap then turned it into a Kicad part. I then went through and traced it again in Kicad's part editor for best clarity and to correct anything I missed.I hope this helps someone else in their designing
Attachments
-
1.6 MB Views: 50