- Joined
- Oct 28, 2023
- Messages
- 79
- Likes
- 38
This is a low cost work log for making your own mini wii, you can either buy the modules I recommend or use your own existing modules, this will help you save your budget for other modules.
The log is only a recommendation of suitable, but not preferred modules! I can only say that it works properly, I can't guarantee its stability, you need to test it yourself!
! For basic mods related to the wii, you can read the community thread where I don't kopen the basic cutting, wiring, cracking, and installation of the system!
<Beginning below! >
(1) Selection of wii motherboard layers
Here I choose 6-layer board, this is not forced to use only six layers or four layers, depends on personal choice, if you have six layers in hand, use six layers, have four layers, use four layers.
Cutting of the six-layer motherboard can be referred to
Nold发布的： [Guide / Release] Noldendo Wii Miicro - v1.1
(2) Recommendation module
SD card reader recommended, reader can use 3.3v input and costs 2 RMB：TF卡外接-淘宝网
Recommended power supply module: three-way regulated power supply module, the module's main chip for theMP8642DU 12V-9V input, can output 3.3V, 1V,1.1V voltage, and three-way voltage is 3A, also can change the output voltage by adjusting the resistance value, the cost of 3.99 RMB
三路同步降压模块MP8642DU FDMC7696 芯片模块 三路稳压电源模块-淘宝网
Recommended audio module: can use 3.3v to drive a two-channel 2w amplifier
USB供电diy微型功放板3W 8403升级模块5V小功放板迷你音响音频放-淘宝网
Cost 5.50 RMB (cheaper options available)
Recommended for decoy modules: 12V mainly for power supply modules
.PDC004-PD诱骗器 PD23.0转DC直流触发转接线QC4充笔记本912 1520V-淘宝网
Cost 1.90 RMB
Better husb238a can also be used Cost: 10 RMB or so
Cooling recommendation: surface pro3 cooler Cost 10 RMB a piece
VGA interface (optional) DB15 HDR15 DR15卧式公座测试板VGA接口转DIP2.54 三排针DB转接板-淘宝网 cost 3 RMB
Having these parts on hand is almost ready for assembly!
You can give me feedback if you have any questions, thanks!
The log is only a recommendation of suitable, but not preferred modules! I can only say that it works properly, I can't guarantee its stability, you need to test it yourself!
! For basic mods related to the wii, you can read the community thread where I don't kopen the basic cutting, wiring, cracking, and installation of the system!
<Beginning below! >
(1) Selection of wii motherboard layers
Here I choose 6-layer board, this is not forced to use only six layers or four layers, depends on personal choice, if you have six layers in hand, use six layers, have four layers, use four layers.
Cutting of the six-layer motherboard can be referred to
Nold发布的： [Guide / Release] Noldendo Wii Miicro - v1.1
(2) Recommendation module
SD card reader recommended, reader can use 3.3v input and costs 2 RMB：TF卡外接-淘宝网
Recommended power supply module: three-way regulated power supply module, the module's main chip for theMP8642DU 12V-9V input, can output 3.3V, 1V,1.1V voltage, and three-way voltage is 3A, also can change the output voltage by adjusting the resistance value, the cost of 3.99 RMB
三路同步降压模块MP8642DU FDMC7696 芯片模块 三路稳压电源模块-淘宝网
Recommended audio module: can use 3.3v to drive a two-channel 2w amplifier
USB供电diy微型功放板3W 8403升级模块5V小功放板迷你音响音频放-淘宝网
Cost 5.50 RMB (cheaper options available)
Recommended for decoy modules: 12V mainly for power supply modules
.PDC004-PD诱骗器 PD23.0转DC直流触发转接线QC4充笔记本912 1520V-淘宝网
Cost 1.90 RMB
Better husb238a can also be used Cost: 10 RMB or soCooling recommendation: surface pro3 cooler Cost 10 RMB a piece
VGA interface (optional) DB15 HDR15 DR15卧式公座测试板VGA接口转DIP2.54 三排针DB转接板-淘宝网 cost 3 RMB
Having these parts on hand is almost ready for assembly!
You can give me feedback if you have any questions, thanks!
