G-boy rev 3 screen flickering

1NK

.
Joined
Apr 29, 2022
Messages
84
Likes
18
Ok, I'm back from sanding the edges of the board, and now the voltage I'm reading from gnd/1.15v is 63.2 ohms. Is this the right voltage? The edges of the board look a lot better now that I sanded up to 1000 grit.
 

BasicBass

DO NOT BUY/SELL WITH USER
.
Joined
Mar 21, 2022
Messages
25
Likes
7
that sounds about right I would plug er up now and see if it boots
 

1NK

.
Joined
Apr 29, 2022
Messages
84
Likes
18
Alright, I'll be back when I solder it back in.
 

1NK

.
Joined
Apr 29, 2022
Messages
84
Likes
18
20120109_202920.jpg

Finally.

I have my USB drive inserted with the BBLoader files on it, so I'm not sure why it says to check if there is a usb device plugged in, but this is great progress nonetheless.
I'm sure I'll run into another problem while building my g-boy where I'll make another thread, but for now I at least get to progress.

Biggest thanks to everyone that helped me in this thread. You are all truly appreciated.
 

CrazyGadget

Crazy Helpful, CrazyGadget
.
Joined
Jun 6, 2020
Messages
601
Likes
832
Portables
???
Awesome! Glad to hear that it's coming on now. Regarding the USB, did you make sure you didn't mix up D+ and D-?
 

1NK

.
Joined
Apr 29, 2022
Messages
84
Likes
18
From what I can tell, I have data positive and negative wired correctly.
 

CrazyGadget

Crazy Helpful, CrazyGadget
.
Joined
Jun 6, 2020
Messages
601
Likes
832
Portables
???
Okay, I looked back at the worklog and it looks like they're in the right places. Are you sure your USB is all formatted correctly? Send a screenshot of the root of the drive.
 

CrazyGadget

Crazy Helpful, CrazyGadget
.
Joined
Jun 6, 2020
Messages
601
Likes
832
Portables
???
Yes it's supposed to be FAT32, reformat and then copy everything back over
 

BasicBass

DO NOT BUY/SELL WITH USER
.
Joined
Mar 21, 2022
Messages
25
Likes
7
Good job man good luck with the rest of the build so far your determination and skills should be able to have you complete this project
 
Top