Question GC+ 2.0 help

[jrob21]

Recently got my GC+ 2.0 and I was trying to test it out by just pressing “A” in the menu. After setting it up it crashed after pressing the A button, upon restarting it didn’t recognize I had a USB plugged in. After switching my usb to the other one on the Wii board I was able to get it back running again. But once again pressing A resulted in a crash, however this time I took a photo. Please let me know if you know what’s going on, I’m really scared as I’ve come along way on my first portable but I don’t know how to solve this. Thank you, for reading!

 

[jrob21]

Flipped the photo

 

[Stitches]

Ca you provide a photo of your wiring?

 

[jrob21]

Ca you provide a photo of your wiring?

So the A button isn’t hooked up to anything, I was just tapping it to ground to test it. The data line is hooked up to where I think it’s supposed to be, and the the power is hooked up to 3.3v and ground on the power management board

 

[jrob21]

 

[Ethan]

It looks like C297 is completely gone, it could be of importance as it goes to the Gpu,

also the purple u10 wire for the GPU via looks to be stripped a little long and could be shorting.

i dont know for sure, but id say with it powered off check for shorts on the voltages lines

 

[Stitches]

I don't remember if the GC+2.0 still has this quirk, but the original GC+ wouldn't work correctly without both joysticks wired in. Might be that