Since I released my ps2 Stls I’ve decided to make a tutorial so anybody that’s interested in making one can get an idea on how to put one together. USE ALL THIS INFO AT YOUR OWN RISK.
IF YOUR USING GMANS PMS THERE IS NO OVERHEATING ISSUES.
This will also be my 3rd and final ps2 using this design, the design is not perfect but will work and there’s plenty of space inside for spaghetti wiring.
Im editing the bottom half so you can use the Regulator board I released made by @Mister M. Alright so I’m going to start with the top Half first since I’m still working on bottom half. I printed the top piece with supports.
Once cleaned up I installed the shoulder buttons they go in from the top side and I use a flat head screw driver to push them in place.
IF YOUR USING GMANS PMS THERE IS NO OVERHEATING ISSUES.
This will also be my 3rd and final ps2 using this design, the design is not perfect but will work and there’s plenty of space inside for spaghetti wiring.
Im editing the bottom half so you can use the Regulator board I released made by @Mister M. Alright so I’m going to start with the top Half first since I’m still working on bottom half. I printed the top piece with supports.
Last edited: