Question The Wii-U GamePad no longer charges through the port at the top left. Specifications of some SMD components (fuses and capacitors)

[iwiiu]

Hi, I wanted to ask for your help.
I accidentally damaged three SMD components with the tip of my soldering iron while replacing the charging port (located at the top left of the GamePad) with a USB-C. On the board, these components are labeled as C100, C97, and F1, and I believe they are two capacitors and one fuse. Could you tell me what the capacity of the capacitors should be and the specifications of fuse F1? I’m referring to the motherboard of the Gamepad WUP-010 (EUR), the black version.

Thanks a lot for your help!

 

[iwiiu]

some images about...

 

[iwiiu]

Unfortunately, this is the current state of my board:

 

[YveltalGriffin]

The caps can be omitted. If you want to replace the fuse, any generic 0402 ~2A one should be OK. Or, if you're feeling lucky, you can jumper it with solder or a zero-ohm resistor.