WiiSPii Emerald Green

StonedEdge

a.k.a. ClonedEdge
.
.
Joined
Nov 16, 2018
Messages
362
Likes
1,482
Location
Japan, Tokyo
Portables
2
Closed up another WiiSPii I had lying around for 3 years yesterday. After some issues with the analog triggers I’ve managed to flash them properly thanks to Aurelio straight from the GC configurator.

Case cost me my left nut from PCBway but it is dyed acrylic. I opted for shielded wire this time for the video since it was a bit noisy in the previous build.

DC947E88-5CC7-4E0F-AEE2-2AEEFA290FA7.jpeg
3328C03E-4D88-4FF0-8167-BBC514E6246C.jpeg
B8C4E28D-DC8F-4D7A-8564-9BE8E7FEB64D.jpeg
A263A93E-08BD-4CBE-9F56-903C5113F9D0.jpeg
36B9E819-B4C8-495D-AD8A-19A166A606F8.jpeg
AFA15F45-8B95-42B9-99BD-8FCFAADFA483.jpeg
471F8DA8-69B9-4784-8FEA-E2B1EAFD4D5E.jpeg


Hey it even fits in my pocket.
THICC.

385771BD-4511-41DB-A2B5-C92D96C01076.jpeg
 

StonedEdge

a.k.a. ClonedEdge
.
.
Joined
Nov 16, 2018
Messages
362
Likes
1,482
Location
Japan, Tokyo
Portables
2
Beautiful build, much wow!
Is it using the gullikit joysticks?
Thanks man! I tried them but they didnt work for me. I just used regular old sticks in the end, couldnt be bothered figuring out why they didnt work :P Maybe someone else can give them a go.
 

cy

.
Joined
Sep 3, 2020
Messages
115
Likes
317
Portables
6
After the struggles you had on the original WiiSPii it's great to see you finally build one and have it go *mostly* smoothly. That emerald case really turned out well even if it did cost an arm and a leg from PCBWay, they do some nice prints over there. Did you plan on adding any screw covers for the top right and left corner screws? Either way, it came out wonderfully! Great work dude!
 
Top