- Joined
- May 8, 2017
- Messages
- 71
- Likes
- 204
I used the translator ...
Hello friends!
I'm creating this post to show my next work ...
This is a Portable Game Cube ...
I'm starting this project aware that many parts are missing due to the difficulty of finding some things in my country ...
Here are some photos of the project started:
The case was printed in 3D ...
The two parts of the case ...
You must be wondering where the holes in the command buttons are, since my case does not seem to have any ...
The idea here is to make a mixed case, I'll be sticking parts of the original control in the case ... This is due to the fact that I do not have enough knowledge in 3D modeling software to draw the holes ... For me it will be easier like this...
This card has already installed the "WASP" chip, everything is working perfectly ... I placed the chip in these points to make it easier to cut the board ...
I will be working with the standard regulator, because the regulators "PTH08080" are not found in my country, as well as quality batteries ... So I imported from China through the site aliexpress, follow the link if they can verify if I bought it right:
Https://www.aliexpress.com/item/PTH...32790287587.html?spm=a2g0s.8937460.0.0.2prfYr
Things in place ...
SD Card (Wasp), Micro SD Slot (SD Gecko), Volume Potentiometer, Speakers and Screen board...
I apologize for not speaking English, and for the bad Google translation ... And all help is welcome !!!
Hello friends!
I'm creating this post to show my next work ...
This is a Portable Game Cube ...
I'm starting this project aware that many parts are missing due to the difficulty of finding some things in my country ...
Here are some photos of the project started:
The case was printed in 3D ...
The two parts of the case ...
You must be wondering where the holes in the command buttons are, since my case does not seem to have any ...
The idea here is to make a mixed case, I'll be sticking parts of the original control in the case ... This is due to the fact that I do not have enough knowledge in 3D modeling software to draw the holes ... For me it will be easier like this...
This card has already installed the "WASP" chip, everything is working perfectly ... I placed the chip in these points to make it easier to cut the board ...
I will be working with the standard regulator, because the regulators "PTH08080" are not found in my country, as well as quality batteries ... So I imported from China through the site aliexpress, follow the link if they can verify if I bought it right:
Https://www.aliexpress.com/item/PTH...32790287587.html?spm=a2g0s.8937460.0.0.2prfYr
Things in place ...
SD Card (Wasp), Micro SD Slot (SD Gecko), Volume Potentiometer, Speakers and Screen board...
I apologize for not speaking English, and for the bad Google translation ... And all help is welcome !!!
Attachments
-
1.6 MB Views: 282
Last edited: