Recent content by leftbrainstrain

Interested, 1 Ashida shell in Gamecube indigo.

Unfortunately I don't have a microSD card from that generation / product line. The closest I have (pictured below) are a new-ish grey and red 256GB Sandisk Ultra (SDSQUAC-256G-GN6MA) and an older black 200GB Sandisk Ultra (SDSDQUAN-200G-G4A) that both work fine with my Wii with a RVL-CPU-40...

USBDeview output for Kingston FCR-MRG2: USBDeview output for Nokia adapter: Comparison of top side of adapters -- notice identical via pattern on plug: Comparison of bottom side of adapters -- no serial number on Nokia adapter: It's difficult to say with 100% certainty if the FCR-MRG2 or...

I did the U10 relocation and trim today, but am having some trouble with resistance values. Board after U10 relocation and trim: Resistance values for the 1.15v rail are much too low, compared to the values reported by someone with the RVL-CPU-01 doing an OM6 trim. Below are the resistance...

Within RVLoader, move the right joystick on your controller, you'll see a circular menu displayed in the center of the screen. There are is an option with label "HB". Move the joystick to select that option and stay on it 2-3 seconds, RVLoader will then display to its own Homebrew Channel screen...

The upside down Homebrew Channel is something that consistently happens for the rest of us, as well. If you go to the Homebrew Channel screen of RVLoader it shouldn't be upside down, though. The explanation I've been told is that it's something to do with the patched cIOS, which Homebrew Channel...

Quick update. I've not made a huge amount of progress, but at least some has been made. I got the case printed in PETG, with significant defects, but it got done. I removed the memory card port, and wired up the PTH08080 modules. Case in blue PETG: 4x PTH08080WAH. Yes, those are solder...

I don't have anything else to add, but for searchability later, I hope y'all will allow me to inject some statistically improbable terms ... You just received the PCB800050v9 revision of the PCB800050 board with the RTD2660 / RTD2660H (RTD2662) chip, and you're wondering about the silkscreen...

Looks like green and blue were swapped. The stars are supposed to be yellow. red + green = yellow red + blue = violet

I'm very surprised that specific SanDisk MicroSD reader is working for you. It worked on my unmodded 4-layer Wii with only one of the seven microSDXC cards I tested it against, and it gets extremely hot while in use. Best of luck. In case you decide to use something other than that USB 3...

You might want to read up a little bit on lithium batteries before proceeding, particularly voltages: https://learn.adafruit.com/li-ion-and-lipoly-batteries/voltages

While it's not portable, the Wii Micro builds cost less and are less complicated: https://www.bitbuilt.net/forums/index.php?threads/guide-release-noldendo-wii-miicro.3750/ If you get one complete and working, you can always recycle many of the parts from it to make a portable.

Sorry to necro thread. Converted Paint.net file to Gimp (XCF) format, for anyone not using Windows. File is too large to attach to post, so shared here: Update: I probably duplicated effort here. Nold appears to have converted the file some time ago, available here...

Sounds exciting! I'm looking forward to seeing more from your research! If you're using ARM intellectual property in your FPGA, request you refrain from posting that part to this site.

https://4layertech.com/products/ashida-pcb-set Diagrams tab, halfway down the page -- Bluetooth module, which is optional. Presumably is for controller sync, but that's a guess.