Recent content by Skibub28

  1. Skibub28

    Hili's TinyTendo

    OK, thank you. I didn't know there was a github for the TNY-TKROM until now.
  2. Skibub28

    Hili's TinyTendo

    Probably the MMC chips. Where did you get your ram and rom chips from as they don't appear to be the ones that were originally from the cartridge?
  3. Skibub28

    Hili's TinyTendo

    Any clue if you'd be able to use the chips from a famicom game for the mini cartridge? Also, while I'm here, is it recommended to have a hot air gun for this project, or am I fine with just a soldering iron?
  4. Skibub28

    Worklog MG&C's GameCube Advance

    You could try using Wesk's 3d scan of the ds lite shell found here https://bitbuilt.net/forums/index.php?threads/ds-lite-scan-3rd-party.6172/ Or buy a third party shell.
  5. Skibub28

    Eyoyo 16:9 y/pb/pr screen?

    Well crap, so I'm pretty much stuck using a 4:3 screen unless someone has one squirreled away somewhere and would be willing to part with in it. Would there be a way to use other screens using additional hardware/software to fix the issue?
  6. Skibub28

    Eyoyo 16:9 y/pb/pr screen?

    Does anyone still have one of the old y/pb/pr compatible 16:9 eyoyo screens that they'd be willing to sell? If so dm me and we'll discuss price If anyone has found any 16:9 alternatives to the eyoyo for ps2 portables yet it would be very appreciated if you would post your findings here? Edit...
  7. Skibub28

    Question Bluetooth Module broke off my Wii (help)

    There is one pad that got ripped off. (Top second one on the left.) So at least that one will have to be wired to the via.
  8. Skibub28

    Question What 3d printer is big enough to print the ashida

    That depends in your print settings and your definition of "decent enough". O originally started with an fdm printed shell but upgraded to an sls one, and it feels a lot better. However, if you are willing to put in the time to sand and fill an fdm printed one then you can end up with a shell...
  9. Skibub28

    Question Ashida Final Touches

    Yeah, when I was building mine I scraped the thermal pads off, realized that I needed them, and ended up digging the mush that remained out of my garbage can and squishing it back into place to form new thermal pads.
  10. Skibub28

    Worklog Indigo Ashida Wii

    I managed to fix my video lines and get this thing closed up. When running games it works just fine, however it tends to freeze while I'm in reloaded, making it really hard to configure gc2wiimote or change the settings. Any clue on what could be causing this issue and how to fix it?
  11. Skibub28

    Worklog Indigo Ashida Wii

    I got vga wired up. Which video wires would I have switched up if I'm getting blue instead of white? Edit: Also gonna add this question here. Will it work if you use the mx chip from a different wii?
  12. Skibub28

    Worklog Indigo Ashida Wii

    I'd already reformatted it once, but this time I used guiformat and it worked. Thanks Stitches.
  13. Skibub28

    Worklog Indigo Ashida Wii

    So I got a new wii and am working on installing rvLoader but I keep getting the error : Error 6 cannot open scripts/topbar.lua: No such file or directory. However when I go to rvloader/themes/main/scripts the topbar.lua file is still there. Any clue on how to fix this? Am I doing something...
  14. Skibub28

    Worklog Indigo Ashida Wii

    In that case, there are no shorts. edit: (At least with any of the voltages.)
  15. Skibub28

    Worklog Indigo Ashida Wii

    Here's the link to my resistances, they changed between the first time I built this, and this time, (especially at 3.3v) but user Stitches said that it should be fine. https://bitbuilt.net/forums/index.php?threads/wii-trim-resistances.2602/page-3#post-64937 Just wondering, but would it still...
Top