ps1

Unlike the much more complete Wii undervolting "guide" this is just a smattering of info found when undervolting the DC, PS1 and N64. Dreamcast info (8w to 5.5w) N64 info (5w to 3.5w) PS1 info (1.5w to 0.7w) Like everything, use this info at your own risk and results will very likely vary...

Is it possible, and if so is there a guide to wire an SD Card Reader like the PS2 Portables do but with a PS1? I got my PS1 for $1 from j4u, it works, just the disc reader is broken, and I am not paying $30 for a disc reader, I'd rather use up some spare wires and an SD Card I have. - Any help...

Does anyone know if there is a guide out there for trimming a SCPH-5500 PS1 or is the process essentially the same for each type? - Thanks in advance

Time to throw my hat in the ring! We've been making a ton of advancements in PS1 portablizing lately, and I'm hoping to make some further advancements to push the console further than it has before. Preliminary features are as follows: PU-18 revision trim Either a Yveltal/tzmwx style board...

[This is a retroactive worklog for the PS1 portable I built for MGC 2023. I may have to double post a bit to document everything!] Last month, I was feeling burned out from working on so many complicated, difficult projects involving custom PCBs. What better way to get my groove back than some...

PS1 Guncon Lightgun Scan Contains: PS1 Guncon Lightgun Left PS1 Guncon Lightgun Right Specs: These are high poly scans, average poly count per mesh is about 2,500,000 triangles. NOTE: 3D scans aren't perfect, if light cannot hit certain parts of the object then the scan will contain...

I recently picked up a SCPH5502 model PS1 for the intention of pairing with a PSIO. As my main CRT only has composite or component video input I felt I was required to purchase the HD Retrovision component cables to get the best video quality. However the retrovision cables are quite pricey at...

Hello everyone, I've been using bitbuild for a long time to familiarize myself with the modding scene, i made a couple of projects before using raspberry pi before but decided not to make a big deal out of it since it's fairly common. lately I've been working on a playstation one portable since...

Is it possible to make a Ps1 portable with ps1 classic? -7.4volt battery with 2s bms (2pcs 3.7v 4000mah) -5" eyoyo screen -usb port to add games using bleamsync -ps1 classic controller -amplifier board -Battery Capacity Indicator Electricity Power LED Display Board

I recently picked up a Playstation Classic and fell in love with the tiny case. I checked out the ps1 motherboard and decided that it would be difficult to fit without some serious rewiring, so I deliberated between the PSP and the ps2 since an advanced trim ps2 motherboard would fit...