Labrat46
.
- Joined
- Oct 9, 2023
- Messages
- 54
- Likes
- 26
Firstly, need to admit I am a newbie in the Raspberry Pi realm but I have fumbled my way this far...
Making a 3.5 inch Simpsons TV using Raspberry Pi Zero 2 W following this guide:
https://www.instructables.com/The-Simpsons-TV-35-Screen-Version/
Have got the screen working well enough, and sound is working fine. Running into an issue with the "VCR buttons". When I hit the left one, it does nothing and when I hit the right, the screen simply goes white.
As far as I can tell, there isn't a clash between the GPIO pins of the screen and the python script (Buttons connect to GPIO 25 and 26 as well as ground), so would anyone have any ideas on what is causing the issue?
(https://wiki.dfrobot.com/3.5_inches_TFT_Touchscreen_for_Raspberry_Pi_SKU__DFR0428)
Cheers,
Making a 3.5 inch Simpsons TV using Raspberry Pi Zero 2 W following this guide:
https://www.instructables.com/The-Simpsons-TV-35-Screen-Version/
Have got the screen working well enough, and sound is working fine. Running into an issue with the "VCR buttons". When I hit the left one, it does nothing and when I hit the right, the screen simply goes white.
As far as I can tell, there isn't a clash between the GPIO pins of the screen and the python script (Buttons connect to GPIO 25 and 26 as well as ground), so would anyone have any ideas on what is causing the issue?
(https://wiki.dfrobot.com/3.5_inches_TFT_Touchscreen_for_Raspberry_Pi_SKU__DFR0428)
Cheers,
Last edited: