wii build

Hello, I've found this website to be very interesting and I enjoy all the ideas and ingenuity, so I decided to post a worklog of my Ashida build to share yet another build and, of course, have the ability to ask questions and get advice from the more experienced people here. I first saw the...

Have you ever decided that the G-Boy and stock Wii consoles are inherently flawed by modern technology? I sure do that is why I have set out to create a Wii that uses several iconic storage mediums. First, the Wii shall use a 1 TB hard drive and a rare 2.88 MB floppy drive. Second, the Wii will...

So, this is my first wii portable, and I want to document the entire progress. I've relocated the u10 and bluetooth, and in a couple of hours, the dremel I ordered should arrive. I also ordered 4 PTH08080's from China, I should only need 3 though because I am planning to use a powerbank circuit...

After almost 6 months(thanks noah), I've finished my first non-kit portable, a G-Wii Rev 2! It features the brand new RVL PMS 2 from 4layertech.com! The new PMS features allow me to view my exact battery percentage in RVLoader and also allows me to see my battery life in-game by pressing...

Hello! My name is BardRights AKA CakeB0ss AKA Thomas and I'm starting my first portable build in the next few days. After years of passing research and a couple of half-assed attempts, I'm finally ready to begin working on portablizing a Wii. I hope this will be a really fun project to learn a...

Here’s a Wii I will be using to make the G Boy Wii portable. I just bought this on eBay and the seller said that the system has a broken disc drive but works and boots into the menu. But when I power it on it only shows a black screen. I tried using a different composite and component cable, I...

Hi everyone, is there any worklog or guide that explains how to relocate wifi?

I am planning to make a Wii portable based off of the Nintendo Switch Lite's design. I'm going to balance aesthetic and functionality. I don't know if docking will be implemented. Here is my concept drawing (blurry finger included!): (The one on the left) I've already found an RVL-CPU-40 on...

Features: USB-C port 3 18650 3600mAh batteries MX relocation Bluetooth relocation- due to planning before Hiidra Slider controller audio (thanks to StonedEdge) Second Z buttons for more mappings with GC2Wiimote Created this portable with a more comfortable form factor in mind, by emulating the...

Hey this is my fist Wii portable and I wanted to do and easy one that I could easily fix everything is on standoffs and spread apart widely so I can see if any wires pop off. It uses a cut down we heat sink and a cheap 40 ml blower fan it's going to be wired up to the five rail on the RVL PMS so...

So, I’ve already installed portableizemii in prep for my g-boy project that I’ve already ordered, the issue is, I can’t seem to get portablizemii to boot into a menu outside of the Wii menu, I’ve installed emulators and tried to figure out if I’m missing an IOS but I may simply be missing...

Hello everyone, I'm new on this awesome forum and after a month of research and walking into BitBuilt I start this thread for share my first portable console the O-WII ! The goal is to make a nice thin and clean portable WII. 1 - the choice of custom power supply : For that I have first see the...

first thanks to all who contribute and gave the bases to be able to make this type of project; I decided to do this worklog based on all the comments of the BuitBuild mentors, but in my country I am not able to find all the bitstore accessories, or they are very expensive for me, so I...

I started work on my first portable a few weeks ago and one dead board later I finally have a setup that boots to portabilize-me post-trim. Currently using 4x pth08080wad regulators to power the system and I've left the AV socket on for now to help with testing. I do have an RVL PMS coming so I...

Hello everybody, this is my first thread, its about some questions regarding to what kind of electronics i must to use compared to the actually that i buy on my country (México) cuz i cant find some that is published here, also i got some questions about how to trim my wii MB, cuz i want to...

So, a while ago I've decided to make a portable wii, I'm naming it the Portiblii! and I need help with its internals. I'm going to order some 18650 3-6Ah batteries wired in 4P (with internal protection because safety first), a 5" AV display, boost converter and buck converters for the power...

I've already made my first dumb mistake on my road to making a portable. When I try to open up a channel from the Wii menu it will boot and work for maybe minute, then crashes and gives me this error message: "An error has occurred. Press the Eject Button, remove the Game Disc, and turn the...

starting work on a portable Wii, last time I was active modding in Wii was a decade ago, 4.2U. Never dabbled in portablizing or board trims, so this is all really cool exciting stuff to me, but I'm not sure on best practices for power control. I have an OLD wii (-01 motherboard, I still have...

Hi all! Been creeping for a while on here and decided to start a project I will have serious difficulty with as I've never done this before. I do not need to cut the Wii board at all but I still need the board to be thin. *GC memory card slots are not needed * Only one USB is needed I've read...

When I tried downloading the cheese to my wii it said FAT error and No USB detected. I tried reformatting it and now it just says exFAT with 32k. I used a program that said it would format it to FAT32 but it still says exFAT when my computer reads it.