AydinRad
.
- Joined
- Feb 2, 2022
- Messages
- 6
- Likes
- 8
Hello everybody, I have spent the last week working on a Noldendo (6-layer trim) and I am happy to say that for the most part, everything has been working fine. However, I have some issues that are keeping me from finishing the job, and I am unsure what is wrong. I will describe them in order of priority.
Firstly, I am having issues getting the Wii to consistently boot games. While I have no issues booting to RVLoader or going to the wii home menu, booting a game in RVLoader (both wii and GameCube) causes the console powers off. I have tried different usb devices to no avail. Sometimes, I will get lucky and the console will decide to boot the game, but only after it has sat for a while. Before I trimmed the console, wii and gamecube games booted successfully everytime.
Second, my video goes black for a few seconds and comes back a few times a minute. This is the case ONLY when I am using component cables at 480p. There is no issues at 480i as far as I can tell.
Third, there is a lot of visual noise on the screen. I understand that this is most likely due to 6-layer Wiis being glitchy, but I figured I'd bring it up. It might be the reason the video goes black on 480p, but I am not sure.
Lastly, whenever I plug in the sensor bar, the console shuts itself off. I have checked the 12V line for shorts, and there is not one. Additionally, I have tried a second sensor bar and that also didn't fix the issue, so I believe the problem lies somewhere with the console.
Thank you!
Here are some photos of my work:
Firstly, I am having issues getting the Wii to consistently boot games. While I have no issues booting to RVLoader or going to the wii home menu, booting a game in RVLoader (both wii and GameCube) causes the console powers off. I have tried different usb devices to no avail. Sometimes, I will get lucky and the console will decide to boot the game, but only after it has sat for a while. Before I trimmed the console, wii and gamecube games booted successfully everytime.
Second, my video goes black for a few seconds and comes back a few times a minute. This is the case ONLY when I am using component cables at 480p. There is no issues at 480i as far as I can tell.
Third, there is a lot of visual noise on the screen. I understand that this is most likely due to 6-layer Wiis being glitchy, but I figured I'd bring it up. It might be the reason the video goes black on 480p, but I am not sure.
Lastly, whenever I plug in the sensor bar, the console shuts itself off. I have checked the 12V line for shorts, and there is not one. Additionally, I have tried a second sensor bar and that also didn't fix the issue, so I believe the problem lies somewhere with the console.
Thank you!
Here are some photos of my work: