- Joined
- Mar 3, 2016
- Messages
- 2,231
- Likes
- 2,961
- Portables
- 2
No way. I'm not going to have a 15 minutes portablehttp://www.batteryspace.com/polymer...9W4MBmmgFOr5dwEQ4bwS2IwWzz-GUloeG8aApDW8P8HAQ
Not as power dense as an 18650 but less outward space
Shhhh don't reveal anythingnot shown in the video: aurelio installing the "NoRibbonCable" IOSes on the screen board
You talkin' shit about my Kill Mii? (yea its pretty awful)No way. I'm not going to have a 15 minutes portable
YepYou talkin' shit about my Kill Mii? (yea its pretty awful)
Only if it promises not to tell the other parent what games were played on itWe're each making one, but working together on the design. They'll look a bit different when finished, but still be brother consoles
Or, I could have it on weekends
I tested these dual action tact switches. They work pretty well and they take no space at all
Honestly? A transistor will work just fine for me. Hahaha. Thanks for the part number!These are EVP-AXBA1A. The two internal switches have a common pad, so they can't be used with the standard dual-tact mod (since one switch is usually connected to ground and the other is connected to 3.3V). The solution is either to use a transistor to switch the signals or use a custom firmware for GC+ which is not publicly available yet (and I don't know when it will).
You bet! There are few switches with the same configuration that are slightly bigger (like a standard 6x6 tact switch). Unless you need something really small, I'd look for thoseHonestly? A transistor will work just fine for me. Hahaha. Thanks for the part number!
I'm still on the fence regarding component size to be honest. I want my next build to be tiny, but to properly do so, I would have to design custom circuit boards and transplant the parts from the various components I use for the portable onto them. I feel as though I'd have essentially do what Nikoil is doing with his NGCP. The problem is, I don't have his resources and I haven't designed my own proper circuit board in over 14 years. Hahaha. Maybe that's too ambitious? IDK.You bet! There are few switches with the same configuration that are slightly bigger (like a standard 6x6 tact switch). Unless you need something really small, I'd look for those
¯\_(ツ)_/¯I'm still on the fence regarding component size to be honest. I want my next build to be tiny, but to properly do so, I would have to design custom circuit boards and transplant the parts from the various components I use for the portable onto them. I feel as though I'd have essentially do what Nikoil is doing with his NGCP. The problem is, I don't have his resources and I haven't designed my own proper circuit board in over 14 years. Hahaha. Maybe that's too ambitious? IDK.
Hahaha! It's the struggle man.¯\_(ツ)_/¯
Tbh with the Wii the trimmings are so easy and need so few relocations that making something like Nikoil's GCP is pretty much useless, unless you wanted to make something like this: https://bitbuilt.net/forums/index.php?threads/piizza-2-0.1012/Hahaha! It's the struggle man.