xsping . Joined Dec 9, 2018 Messages 154 Likes 50 Jun 2, 2019 #1 I made powermii lite by myself, it outputs stable voltage, but it will overheat within 30 seconds with load, is it normal or not?
I made powermii lite by myself, it outputs stable voltage, but it will overheat within 30 seconds with load, is it normal or not?
jefflongo Broke BitBuilt Staff member . . Joined Dec 15, 2016 Messages 1,017 Likes 1,361 Location Santa Barbara, CA Portables 3 Jun 2, 2019 #2 Sounds like whatever you're connecting it to has a short.
Aurelio ᕕ( ᐛ )ᕗ Staff member . . . . . . Joined Mar 3, 2016 Messages 2,229 Likes 2,952 Portables 2 Jun 2, 2019 #3 It could be caused also by poor soldering. Try reflowing the board. What does overheat? One of the inductors or one of the regs?
It could be caused also by poor soldering. Try reflowing the board. What does overheat? One of the inductors or one of the regs?
Shank Moderator Staff member . . Joined Jan 31, 2016 Messages 1,292 Likes 2,747 Portables 6 Jun 2, 2019 #4 Pictures would be helpful
xsping . Joined Dec 9, 2018 Messages 154 Likes 50 Jun 2, 2019 #5 Aurelio said: It could be caused also by poor soldering. Try reflowing the board. What does overheat? One of the inductors or one of the regs? Click to expand... inductor &tlv62130, they are not overheating without load Last edited: Jun 2, 2019
Aurelio said: It could be caused also by poor soldering. Try reflowing the board. What does overheat? One of the inductors or one of the regs? Click to expand... inductor &tlv62130, they are not overheating without load