Sm6413
.
- Joined
- Feb 15, 2023
- Messages
- 27
- Likes
- 6
Hi guys so long story short i blew my wii's internal regulators(i think) when trying to disable the regulator's undervoltate protection( i tried connecting VIN to VCC in order to jump the regulator's supply voltage which is controlled by a 14 chip IC and turns off when underpowered.) Now i get a red light and when i press ON it stays red.
The wii is not trimmed, it has rvloader installed, but i selected NO to "patch out wifi" when installing, just to be able to play games online.(it worked)
I tried sending all the required voltages to the wii, using another wii, but it does nothing, and i saw somewhere on this forum that the cause for that is that the regulating components are not removed.(EDIT : they were right)
So what i'm going to do is to remove all regulator related components, install U10, and install the wifi module, then i will inject all the required voltages (1V,1.15V,3.3V+the 1.8v from the LDO) and hopefully it will turn on, then if it turns on i will just do a OMGWTF trim
The problem is that i found no tutorial or instructions to wire the wifi module to the wii... and without wifi it will not turn on..does someone has instructions to install the wifi module? Thanks
The wii is not trimmed, it has rvloader installed, but i selected NO to "patch out wifi" when installing, just to be able to play games online.(it worked)
I tried sending all the required voltages to the wii, using another wii, but it does nothing, and i saw somewhere on this forum that the cause for that is that the regulating components are not removed.(EDIT : they were right)
So what i'm going to do is to remove all regulator related components, install U10, and install the wifi module, then i will inject all the required voltages (1V,1.15V,3.3V+the 1.8v from the LDO) and hopefully it will turn on, then if it turns on i will just do a OMGWTF trim
The problem is that i found no tutorial or instructions to wire the wifi module to the wii... and without wifi it will not turn on..does someone has instructions to install the wifi module? Thanks
Last edited: