limone79
.
Hi.
Two years ago, I made a small sized ps2.
I decided to make a new ps2 because of the small size of the screen and the feeling of operation.
- PS2 scph-79000
- 5 inch LCD
- 18650 battery x 2
- PS2 controller(fake)
- SD loader (MX4SIO)
This is a portable ps2 I made 2 years ago.
The small screen is inconvenient.
I used a standard trim.
I decided to use a fake controller that is easy to modify.
The cut was made to the smallest possible size.
There seems to be no problem when connected to the ps2.
I want to use 2 memory card slots.
I checked it by connecting it to the connector disconnected from the ps2.
Fortunately, the 480i output from the LCD I have was connected to the vga and I decided to use it.
There are a few design mistakes in the case, so I'll fix it and upload it again.
Two years ago, I made a small sized ps2.
I decided to make a new ps2 because of the small size of the screen and the feeling of operation.
- PS2 scph-79000
- 5 inch LCD
- 18650 battery x 2
- PS2 controller(fake)
- SD loader (MX4SIO)
This is a portable ps2 I made 2 years ago.
The small screen is inconvenient.
I used a standard trim.
I decided to use a fake controller that is easy to modify.
The cut was made to the smallest possible size.
There seems to be no problem when connected to the ps2.
I want to use 2 memory card slots.
I checked it by connecting it to the connector disconnected from the ps2.
Fortunately, the 480i output from the LCD I have was connected to the vga and I decided to use it.
There are a few design mistakes in the case, so I'll fix it and upload it again.
Attachments
-
542.4 KB Views: 254
Last edited: