- Joined
- Mar 21, 2021
- Messages
- 86
- Likes
- 16
I believe I fixed this short, it's reading a resistance with the ohmeter, but I'm still having issues with a blue screen after powering on.The silkscreen on the underside of the board has the pin designations.
Also, short spotted
First I removed the composite video wiring, which was giving me a blue screen when wired that way. My wii has patched VGA from RVLoader which I assumed was the cause for the blue screen earlier, however after wiring the VGA wires (images below) I get the same blue screen. I doublechecked all the wires and I'm certain they are going to the correct pins on the screen. I didn't have color coded wires, so I tied a knot on each end to differentiate the ground wire from the live wire, so I don't think I've made any errors as far as hookups. Is my trim the problem? Or any idea where the problem could be located?
All your input is appreciated, thanks in advance.
Attachments
-
236.4 KB Views: 68
-
232.7 KB Views: 62
-
149.2 KB Views: 57
-
220.8 KB Views: 65
-
225.5 KB Views: 65
-
209 KB Views: 65
-
3.2 MB Views: 72
-
3.3 MB Views: 75
Last edited: