Worklog Portable J4125

[CLAUDIO]

PC Stick T6 PRO

• Celeron J4125 2.00 GHz
• Intel HD 600
• 6G RAM DDR4
• 128 Emm
• LCD 7" 1024x600 IPS (Custom Firmware) with touch screen

Battery: Samsung EB-P1100CSPG - Approximate runtime of 4h running Crysis 1 (not remaster)
BMS: Sw6106
Generic Joycon Bluetooth running with a custom BetterJoy

 

[Wesk]

Wanna give us some info?

 

[CLAUDIO]

Wanna give us some info?

Hello Wesk, I've finished including the initial information.
I have about 3 projects half stopped, because I have serious vision problems . I believe this one ends before the others

 

[Dmcke5]

Nice. I'm keen to see some more pictures of the back of it. Is it running from its own power yet?
If you get a chance, can you get some pictures of windows running at 1024x600 for me? I'm planning another windows build in the not too distant future with a screen of that resolution but I am concerned about the usability of windows at such a low resolution.

 

[Stitches]

PC Stick T6 PRO

• Celeron J4125 2.00 GHz
• Intel HD 600
• 6G RAM DDR4
• 128 Emmc

Battery: Samsung EB-P1100CSPG - Approximate runtime of 4h running Crysis 1 (not remaster)
BMS: Sw6106
Generic Joycon Bluetooth running with a custom BetterJoy

View attachment 18129View attachment 18130
View attachment 18131

But can it run............ oh..... it can. Sweet!

 

[Kranimations_YT]

Yooo that looks sick! How do modern games run on it?

 

[Dmcke5]

Yooo that looks sick! How do modern games run on it?

Just search YouTube for "J4125 gaming" and you'll get a reasonable idea of what it can run. I suppose it depends on what you consider modern too. It'll handle Amoung us just fine but I doubt it would even load into cyberpunk lol.

 

[CLAUDIO]

Nice. I'm keen to see some more pictures of the back of it. Is it running from its own power yet?
If you get a chance, can you get some pictures of windows running at 1024x600 for me? I'm planning another windows build in the not too distant future with a screen of that resolution but I am concerned about the usability of windows at such a low resolution.

I haven't finished the back cover yet, but the videos are already running from the celeron j4125.

 

[vipe_202]

Nice. I'm keen to see some more pictures of the back of it. Is it running from its own power yet?
If you get a chance, can you get some pictures of windows running at 1024x600 for me? I'm planning another windows build in the not too distant future with a screen of that resolution but I am concerned about the usability of windows at such a low resolution.

Not sure where you're located so sourcing this may not be amazing but there is a 7" 1280*800 IPS panel floating around 30pin lvds # HSD070PWW1-B01 I did see just the panel on AliExpress, but Robotshop.com did have it with a driver board, and a voltage modifiable board too

7" IPS 1280*800

 

[Dmcke5]

Not sure where you're located so sourcing this may not be amazing but there is a 7" 1280*800 IPS panel floating around 30pin lvds # HSD070PWW1-B01 I did see just the panel on AliExpress, but Robotshop.com did have it with a driver board, and a voltage modifiable board too

7" IPS 1280*800

I'm not going to have room for a dedicated display driver board so whatever display I choose will have to be driven by an open source display controller that I can integrate into my PCB. The 1024x600 displays are still TTL which means I can use the TFP401 DVI encoder design that adafruit makes (and the thankfully provides schematics for). Anyway, I'll start my own thread once things are properly under way. Don't want to clog up someone else's post!

 

[CLAUDIO]

Without a heatsink/Fan:

 

[CLAUDIO]

 

[CLAUDIO]

Unfortunately burned :R