Question Portable Wii Does Not Recognize USB

[CarlosC]

I'm doing the portable wii project but it's the second card I get and after cutting the USB doesn't recognize in the RVLOADER I've already tested both USB

 

[Nodel]

Make sure that the wires D+ D- are twisted

 

[CarlosC]

no I soldered straight without twisting

 

[Nzqs]

no I soldered straight without twisting

Well, you should twist them up, and tight.

 

[CarlosC]

thanks I'll do it now but I'm using 0.2mm wire is there any problem?

 

[CarlosC]

did not work

 

[Customledmods]

did not work

Try using thinner wire, I used 32 awg magnet wire and it worked for me.

 

[CarlosC]

I tested it but it didn't work is the wire too long?

 

[Customledmods]

I tested it but it didn't work is the wire too long?

Use thicker wire for the negative and positive on the usb. And thin wire for the data lines

 

[CarlosC]

I tried with thicker threads but it didn't work

 

[CarlosC]

 

[Customledmods]

I tried with thicker threads but it didn't work

Hey desolder the wires for the usb off motherboard then clean it really good with alcohol. After that the soldering here

 

[CarlosC]

did not work the pendrive nor starts it seems to be short do you need to put bluetooth or wifi on the board too to work?

 

[Customledmods]

did not work the pendrive nor starts it seems to be short do you need to put bluetooth or wifi on the board too to work?

No hey did you sand the edges ?

 

[CarlosC]

Yes

 

[Customledmods]

from the picture your edges don’t look sanded smooth, I recommend you make sure there’s no shorts there

 

[CarlosC]

I sanded a little more but it didn't work

 

[Customledmods]

I sanded a little more but it didn't work

Do not power the board until you know for certain there’s no shorts. Also check your wii resistance https://bitbuilt.net/forums/index.php?threads/wii-trim-resistances.2602/

 

[CarlosC]

it worked with another pendrive I tested about 7

 

[Customledmods]

it worked with another pendrive I tested about 7

I’m just saying, I’m about done with my first wii portable and i followed all these steps so far I have no issues