- Joined
- Aug 2, 2019
- Messages
- 14
- Likes
- 4
I’m building an N64 portable and have been researching/collecting parts for the build based on the BOM and various threads posted here. For video, I’ve settled on the 5” ZJ050NA-08C using the KYV-N2 V6 driver board. Before I order the display I wanted to confirm it will work with my power plan.
I am planning to use a 7.4V battery system and have a converter regulating the voltage down to 3.3V for the N64 and audio amplifier. I see the display can run on anything from 6.5-13.5V so I should be able to run it directly from the 7.4V. However, the driver board says it wants 12V. I cannot seem to find a voltage range spec on the driver board. Does anyone know if I can run it on the 7.4V? If not, how do you work around the supply issue? Another power converter?
Thank you for your time and help.
I am planning to use a 7.4V battery system and have a converter regulating the voltage down to 3.3V for the N64 and audio amplifier. I see the display can run on anything from 6.5-13.5V so I should be able to run it directly from the 7.4V. However, the driver board says it wants 12V. I cannot seem to find a voltage range spec on the driver board. Does anyone know if I can run it on the 7.4V? If not, how do you work around the supply issue? Another power converter?
Thank you for your time and help.