- Joined
- Jan 31, 2016
- Messages
- 1,292
- Likes
- 2,747
- Portables
- 6
The PiiWii pocket was the first portable I saw to the end. I loved the case and ergonomics, but the internals were pretty awful. I've been working on a followup for a few months with the goal of keeping the same external appearance. However, I plan on reworking the internals using everything I have learned in the 2 years since making the original. Hopefully these internals will be something I can be proud of. I finally have something to show, so its time for a worklog.
Planned features:
-Similar appearance to the PiiWii Pocket
-3D printed Case
-Screw posts
-99% glue free
-Custom trim with partial NAND relocation
-3.5" 640*480 VGA LCD (4x the resolution of the original)
-Same face buttons, but improved start and shoulder buttons
-3DS Sliders
-4 18650s
-7mm wider, but much thinner (smaller overall)
-Dual USB ports
-Rumble Motor
-Custom milled copper heatsink
-Custom PCBs Galore, including controller, audio amp, regs, and battery management
-Secret bonus feature to be revealed
Here's some pictures. More to come.
Edit: Uploaded higher res photos. Accidentally uploaded the thumbnails before. Oops.
Planned features:
-Similar appearance to the PiiWii Pocket
-3D printed Case
-Screw posts
-99% glue free
-Custom trim with partial NAND relocation
-3.5" 640*480 VGA LCD (4x the resolution of the original)
-Same face buttons, but improved start and shoulder buttons
-3DS Sliders
-4 18650s
-7mm wider, but much thinner (smaller overall)
-Dual USB ports
-Rumble Motor
-Custom milled copper heatsink
-Custom PCBs Galore, including controller, audio amp, regs, and battery management
-Secret bonus feature to be revealed
Here's some pictures. More to come.
Edit: Uploaded higher res photos. Accidentally uploaded the thumbnails before. Oops.
Last edited: