- Joined
- Feb 23, 2022
- Messages
- 9
- Likes
- 1
I got a Wii with an unsuccessfully made VGA mod, but it worked on the composite.
the bottom of the board was sealed with adhesive tape, I removed the tape and redid the VGA mod, but there is no image either by VGA or by composite.
when examining the board, I noticed that there was no resistance R23, apparently it came off when the tape was removed.
if anyone has a disassembled console, please measure the resistance of resistor R23.
P.S. judging by the connection to the AVE, R23 and C44 is an RC reset circuit.
the bottom of the board was sealed with adhesive tape, I removed the tape and redid the VGA mod, but there is no image either by VGA or by composite.
when examining the board, I noticed that there was no resistance R23, apparently it came off when the tape was removed.
if anyone has a disassembled console, please measure the resistance of resistor R23.
P.S. judging by the connection to the AVE, R23 and C44 is an RC reset circuit.