- Joined
- Jan 12, 2020
- Messages
- 5
- Likes
- 33
- Portables
- 0
Hi!
I got tired of the bad SNES schematics floating around online.
So I made my own, but this time they are open-source and I traced the board to verify them (spoiler: they were wrong in multiple places)
They are for the PAL 2CHIP rev5
The source is at:
https://github.com/stonedDiscord/nonSNES
You can view KiCAD files online using KiCanvas (it takes a few seconds to load)
https://kicanvas.org/?github=https://github.com/stonedDiscord/nonSNES
I've already assembled one of them but sadly the S-CLK I have is broken and just gets hot.
Other than the CPU, PPU1, PPU2, WRAM, S-DSP, S-SMP, S-CLK, S-ENC chips they can be made entirely from new parts.
I got tired of the bad SNES schematics floating around online.
So I made my own, but this time they are open-source and I traced the board to verify them (spoiler: they were wrong in multiple places)
They are for the PAL 2CHIP rev5
The source is at:
https://github.com/stonedDiscord/nonSNES
You can view KiCAD files online using KiCanvas (it takes a few seconds to load)
https://kicanvas.org/?github=https://github.com/stonedDiscord/nonSNES
I've already assembled one of them but sadly the S-CLK I have is broken and just gets hot.
Other than the CPU, PPU1, PPU2, WRAM, S-DSP, S-SMP, S-CLK, S-ENC chips they can be made entirely from new parts.