- Joined
- Jul 9, 2020
- Messages
- 227
- Likes
- 498
Since @Nicholas298 N64HHv2 has been making such waves on the scene, everyone has been PMing me about getting some sparkleboard action. So i've decided to make a run of PCBs for the people. HALLELUJAH..
I touched it up a bit this morning. (no traces, just silk stuff) And I rounded the corners like a good bear.
The CNT-NUS chip and the XTAL must be harvested from original controller. (I had hoped to find a XTAL replacement with @YveltalGriffin but I never could find one of the right value that was available or not like $40 a piece)
All SMD passives are 0603.
All Capacitors are 0.1uF
Resistors are as marked on back of board as per value. ( Its possible to use N64 controller resistors but they are much bigger and will need some bodge skill. Else just use new 0603s of same value.
U3 is the pic 16f15324
Please PM if interested. First run will be 25 boards. THANKS
I touched it up a bit this morning. (no traces, just silk stuff) And I rounded the corners like a good bear.
The CNT-NUS chip and the XTAL must be harvested from original controller. (I had hoped to find a XTAL replacement with @YveltalGriffin but I never could find one of the right value that was available or not like $40 a piece)
All SMD passives are 0603.
All Capacitors are 0.1uF
Resistors are as marked on back of board as per value. ( Its possible to use N64 controller resistors but they are much bigger and will need some bodge skill. Else just use new 0603s of same value.
U3 is the pic 16f15324
Please PM if interested. First run will be 25 boards. THANKS
