Solved Wasp fusion dead?

[bascocarmelo]

After finally getting my ass off to get some work done for my gcp, i started taking off a lot of pieces and reseating each component to make a more compact fit. One of them was rewiring yet again my wasp fusion to the mobo. But this time. I couldnt get a response out of the wasp, not even a led lighting up. No blue or red led to spot. Ive double checked, million checked my soldering. It was as clean as i can get. Tried running it off a working wii i recently purchased. Nope. Nothing as well. Changed my ribbon cable to that of the spare wii's. Still nothing. Is it dead? Fried? I am almost positive this time its dead. Any suggestions how to revive it?

Damn. Honestly wished it was the board that went out instead of the wasp like last time.

 

[Bakuku]

@bascocarmelo

Where do you live?

 

[Noah]

Did you have an SD card inserted @bascocarmelo?

 

[bascocarmelo]

@bascocarmelo

Where do you live?

Philippines, Manila. Why so man?

Did you have an SD card inserted @bascocarmelo?

Yup. Tried it first with an sd card inserted then without. Then with sd card reader connected to the wasp, then again without.

 

[Noah]

Philippines, Manila. Why so man?


Yup. Tried it first with an sd card inserted then without. Then with sd card reader connected to the wasp, then again without.

Formatted to FAT32?

He probably wants to buy it for cheap.

 

[bascocarmelo]

Formatted to FAT32?

He probably wants to buy it for cheap.

Thanks man. Will try to do it after work.

Only if it will be replaced with a good one.

 

[Stitches]

replaced

 

[bascocarmelo]

Well. I got it working...somehow. After formatting my sdcard to FAT32, i hooked it up and still no response from the wasp. so i tried reformatting it yet again back to exFAT at least three times back and forth. To my utter frustration, i didn't get to seat the ribbon properly to the pin adapter connected to the mobo. As i was going downstairs, i sent the wasp flying the fuck down at least 10 steps. And somehow, now its working. I have no fucking idea how. but it is. Will observe the portable for a few more hours. i hope its not one of those alive-for-only-a-few-hours kind of thing. Thanks for the help fam.

 

[GingerOfOz]

Well. I got it working...somehow. After formatting my sdcard to FAT32, i hooked it up and still no response from the wasp. so i tried reformatting it yet again back to exFAT at least three times back and forth. To my utter frustration, i didn't get to seat the ribbon properly to the pin adapter connected to the mobo. As i was going downstairs, i sent the wasp flying the fuck down at least 10 steps. And somehow, now its working. I have no fucking idea how. but it is. Will observe the portable for a few more hours. i hope its not one of those alive-for-only-a-few-hours kind of thing. Thanks for the help fam.

Hey, this has happened before.

 

[bascocarmelo]

Hey, this has happened before.

Welp. Maybe it wasnt an April Fools prank after all.

Wasp still going. Hopefully i can tag this one good now. Cheers.