So I'm having some unexpected trouble with my OMGWTF trimmed wii with it not booting. It boots to a black screen, and sometimes the usb starts flashing but immediately stops. I trimmed this a while ago (6 months ago now) and it worked pretty much fine throughout that time, but now it is having this issue. I thought it might have been a U10 issue, so I replaced my old one with a new one (thanks @Shank!) but it still does the same thing. I just discovered, though, that ground is apparently shorted with 1v as it has a solid beep with continuity check, and it has a very slight beep when checking between ground and 1.15v. I have no idea why they're suddenly shorted.. I sanded the edges of my board again and they're still shorted. I double checked all of my connections to the board to make sure they weren't shorting to anything. Ideas?