Hi y’all!
I was messing around with the Compendium and I decided to try and mark out my own trim markings. mainly because I wanted to keep the 4 screw holes but want to challenge myself with the trimming and relocation of LMAO and OMEGA trims. All the trims are octagons (even if I had to stretch a little for the omega) because they are the bestagons and should all be made up of 135° angles. In my compendium I have them named THOMGWTF, THOMAO, and THOMEGA so that is what I will be referring to them as.
THOMGWTF:
THOMAO:
THOMEGA:
Things I am still figuring out:
I am trying to learn this from my own research so if you see something out of place, please let me know!
Thanks for reading!
THOM
I was messing around with the Compendium and I decided to try and mark out my own trim markings. mainly because I wanted to keep the 4 screw holes but want to challenge myself with the trimming and relocation of LMAO and OMEGA trims. All the trims are octagons (even if I had to stretch a little for the omega) because they are the bestagons and should all be made up of 135° angles. In my compendium I have them named THOMGWTF, THOMAO, and THOMEGA so that is what I will be referring to them as.
THOMGWTF:
THOMAO:
THOMEGA:
Things I am still figuring out:
- WIFI wiring when cutting off the resistor array
- I am trying to keep R71, R191, and R19 traces intact when trimming.
- I am trying to keep R71, R191, and R19 traces intact when trimming.
I am trying to learn this from my own research so if you see something out of place, please let me know!
Thanks for reading!
THOM