Search results

This is not a joke I built my own N64HH! Features N64 Advanced Trim with RCP wiring 5 inch 4:3 Screen RVL PMS 2 64 Amp N64 Controller Module by Gman 2x 18650 Batteries Controller button PCBS Added volume buttons and L Button This build was a lot of fun and also my first time...

I built my own PiiWii Pocket! Features: Trimmed Wii All 4 Layer Tech boards PMS, GC+, UAMP Bluetooth module and built in Sensor bar Front face volume buttons and Sync 640x480 3.5 inch IPS Display Direct Drive External USB ports, Headphone jack and Barrel jack for charging Dual tact...

Crazzyleprechaun's Pii Wii Pocket Worklog I've been wanting to finish this portable for so long but unfortunately time and lack of skills wasn't on my side when I attempted to build this in 2017 (I think that's when I started). Either way I have revisited this project many time in the past and...

Hey guys I completed this fully clear Ashida build and I thought I'd share it since I really like the look of it. I used resin casted GameCube buttons and tried to keep the internals as clean as possible. The Ashida is such a fun build with all the streamline 4Layer Tech boards and the form...

I completed this G-Boy as a commission and felt it was necessary to share this for prosperity and as it is a unique G-Boy using some of the 4 Layer Tech boards I thought it would be interesting to show off my approach for using these boards within the G-Boy. I used the 4Layer Tech PMS and USB C...

I’m selling this Black Louii rev 2 after many hours of use and playing through Super Mario Galaxy 2/ testing it thoroughly. I enjoyed building and playing it very much but I would like to sell it. There are no issues with this unit and the case was printed through JLCPCB. This unit comes with a...

Hi Everyone, I have a few issues and questions regarding the new PMS. The battery led shows red when it is at 50% charged and green when it is on low battery. Not sure if this is intentional. The Battery current is showing as negative in RVLoader. This could be why the LED indicator is...

Hey guys I just started working on my G-Boy build. I didn't get very far into it but I wanted to unbox it and make sure I had all the tools I needed to get started. Everything looks great and I love the look of the light blue case. I chose the black switch stick option because I only had black...

Hello everyone hoping to start the new year off with a portable. I'm hoping 2020 will be the year that I actually build a complete portable! Anyways here are some of the main features I'm hoping to implement into my build. U Amp Wii PMS Board Potentially relocate the NAND? USB C Charging with...

A while ago I had been working on a Wii portable in Inventor then I decided to scrap the whole thing and start over. I started working on a case in Fusion360 and I'm pretty close to finishing the design. This design is pretty similar to the previous one I made in inventor. I have all the parts...

I decided I wanted to try to work on something different progress for this project will be really slow because I don't have that much time and I've caught senioritis which is pretty bad. Here's the progress I've made not very much but I saved 10 dollars by not buying av and power cord. I might...

I decided to start working on a PS2 portable since it has some of my favorite games from my childhood on it (Kingdom hearts and sly cooper) and I also noticed there was a lacking of sony portables on this site so I decided to change that here is my work so far: I was also thinking about...

I had this working but whenever I moved the joystick in the Y direction the screen flashed and switched through channels and wii games etc.. but the x and diagonal directions would work so I tried to change some GC+ settings and adjust the range and now it just goes so far off the screen the...

I just bought this on eBay and I don't get what I'm doing wrong my Wii isn't broken because it worked on my tv I'm getting five volts and the speakers worked on another amp and they are DS speakers could anyone tell me what I'm doing wrong here are some pics of my wiring

Found this old relic made by Palmer on mod retro in 2010 he was kind of accurate with the impossible trim but not quite it's amazing how far we've come and how long it took us to get here I just thought I would share this most of you have probably already seen this

I was wondering if anyone had a case designed for a Wii portable I can't stand frakencasing and I decided to post this to see if anyone had a case they weren't using any case with a GameCube button layout will work

I tried to use this with 2 18650s and my batteries wont charge past 7.01v and P- also isn't giving an output on my volt meter I don't know why this is happening and I am sure I have everything wired correctly

I was thinking of going between these two irons http://www.homedepot.com/p/Weller-Analog-Soldering-Station-WES51/203525863 http://www.homedepot.com/p/Hakko-70-Watt-Digital-Soldering-Station-FX888D-29BY-P/204215981?MERCH=REC-_-PIPHorizontal1_rr-_-203525863-_-204215981-_-N If you have a better...

When i was relocating the WiFi board i desoldered the filters where you are supposed to relocate and now it will not turn on and I am sure the relocation is correct does this stop the WiFi module from working?